Δεν υπάρχει πλέον κάρτα ήχου μετά από update

[the_eye]

Βλέπω ότι έχεις βάλει κάποιο ppa. Δες από το κέντρο λογισμικό τι αλλαγές έχουν γίνει την ημερομηνία της ενημέρωσης και σε ποια πακέτα.

[spirosmeg]

Την Παρασκευη το πρωι την εκανε οποτε εδω ειμαστε:

[the_eye]

Δώσε μας και το dmesg.
Βλέπω ότι τα πακέτα είναι από το ppa, οπότε αυτό μπορεί να έχει το bug.

[spirosmeg]

Οκ

Κώδικας: Επιλογή όλων

[ 1.845690] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 1.845695] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 1.845698] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.845707] ehci-pci 0000:00:13.2: debug port 1
[ 1.845730] ehci-pci 0000:00:13.2: irq 17, io mem 0xfdffb000
[ 1.857224] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.857258] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.857260] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.857261] usb usb2: Product: EHCI Host Controller
[ 1.857262] usb usb2: Manufacturer: Linux 3.13.0-35-generic ehci_hcd
[ 1.857264] usb usb2: SerialNumber: 0000:00:13.2
[ 1.857454] hub 2-0:1.0: USB hub found
[ 1.857460] hub 2-0:1.0: 5 ports detected
[ 1.857738] ehci-pci 0000:00:16.2: EHCI Host Controller
[ 1.857742] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3
[ 1.857745] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.857754] ehci-pci 0000:00:16.2: debug port 1
[ 1.857778] ehci-pci 0000:00:16.2: irq 17, io mem 0xfdff8000
[ 1.869217] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 1.869256] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.869258] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.869259] usb usb3: Product: EHCI Host Controller
[ 1.869261] usb usb3: Manufacturer: Linux 3.13.0-35-generic ehci_hcd
[ 1.869262] usb usb3: SerialNumber: 0000:00:16.2
[ 1.869455] hub 3-0:1.0: USB hub found
[ 1.869461] hub 3-0:1.0: 4 ports detected
[ 1.869558] ehci-platform: EHCI generic platform driver
[ 1.869565] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.869567] ohci-pci: OHCI PCI platform driver
[ 1.869743] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 1.869748] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4
[ 1.869766] ohci-pci 0000:00:12.0: irq 18, io mem 0xfdffe000
[ 1.929193] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.929195] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.929197] usb usb4: Product: OHCI PCI host controller
[ 1.929198] usb usb4: Manufacturer: Linux 3.13.0-35-generic ohci_hcd
[ 1.929200] usb usb4: SerialNumber: 0000:00:12.0
[ 1.929381] hub 4-0:1.0: USB hub found
[ 1.929401] hub 4-0:1.0: 5 ports detected
[ 1.929681] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 1.929685] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 1.929697] ohci-pci 0000:00:13.0: irq 18, io mem 0xfdffc000
[ 1.989171] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.989173] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.989174] usb usb5: Product: OHCI PCI host controller
[ 1.989176] usb usb5: Manufacturer: Linux 3.13.0-35-generic ohci_hcd
[ 1.989177] usb usb5: SerialNumber: 0000:00:13.0
[ 1.989352] hub 5-0:1.0: USB hub found
[ 1.989360] hub 5-0:1.0: 5 ports detected
[ 1.989643] ohci-pci 0000:00:14.5: OHCI PCI host controller
[ 1.989647] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 6
[ 1.989658] ohci-pci 0000:00:14.5: irq 18, io mem 0xfdffa000
[ 2.049249] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.049251] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.049253] usb usb6: Product: OHCI PCI host controller
[ 2.049255] usb usb6: Manufacturer: Linux 3.13.0-35-generic ohci_hcd
[ 2.049256] usb usb6: SerialNumber: 0000:00:14.5
[ 2.049456] hub 6-0:1.0: USB hub found
[ 2.049465] hub 6-0:1.0: 2 ports detected
[ 2.049711] ohci-pci 0000:00:16.0: OHCI PCI host controller
[ 2.049715] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 7
[ 2.049726] ohci-pci 0000:00:16.0: irq 18, io mem 0xfdff9000
[ 2.109129] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.109132] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.109133] usb usb7: Product: OHCI PCI host controller
[ 2.109134] usb usb7: Manufacturer: Linux 3.13.0-35-generic ohci_hcd
[ 2.109136] usb usb7: SerialNumber: 0000:00:16.0
[ 2.109316] hub 7-0:1.0: USB hub found
[ 2.109333] hub 7-0:1.0: 4 ports detected
[ 2.109432] ohci-platform: OHCI generic platform driver
[ 2.109439] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.109509] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 2.109513] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 8
[ 2.109609] xhci_hcd 0000:02:00.0: irq 40 for MSI/MSI-X
[ 2.109667] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.109669] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.109671] usb usb8: Product: xHCI Host Controller
[ 2.109672] usb usb8: Manufacturer: Linux 3.13.0-35-generic xhci_hcd
[ 2.109674] usb usb8: SerialNumber: 0000:02:00.0
[ 2.109761] hub 8-0:1.0: USB hub found
[ 2.109768] hub 8-0:1.0: 2 ports detected
[ 2.109846] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 2.109849] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 9
[ 2.109885] usb usb9: New USB device found, idVendor=1d6b, idProduct=0003
[ 2.109886] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.109888] usb usb9: Product: xHCI Host Controller
[ 2.109890] usb usb9: Manufacturer: Linux 3.13.0-35-generic xhci_hcd
[ 2.109891] usb usb9: SerialNumber: 0000:02:00.0
[ 2.109975] hub 9-0:1.0: USB hub found
[ 2.109983] hub 9-0:1.0: 2 ports detected
[ 2.117337] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 2.117339] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 2.117458] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.117562] mousedev: PS/2 mouse device common for all mice
[ 2.117694] rtc_cmos 00:04: RTC can wake from S4
[ 2.117787] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 2.117808] rtc_cmos 00:04: alarms up to one month, 242 bytes nvram, hpet irqs
[ 2.117868] device-mapper: uevent: version 1.0.3
[ 2.117943] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 2.117950] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.118041] TCP: cubic registered
[ 2.118129] NET: Registered protocol family 10
[ 2.118284] NET: Registered protocol family 17
[ 2.118290] Key type dns_resolver registered
[ 2.118695] Loading compiled-in X.509 certificates
[ 2.119462] Loaded X.509 cert 'Magrathea: Glacier signing key: 3cd3204673e57957e2ed3f114700351849763662'
[ 2.119469] registered taskstats version 1
[ 2.122351] Key type trusted registered
[ 2.124864] Key type encrypted registered
[ 2.127278] AppArmor: AppArmor sha1 policy hashing enabled
[ 2.127281] IMA: No TPM chip found, activating TPM-bypass!
[ 2.127570] regulator-dummy: disabling
[ 2.127644] Magic number: 14:675:500
[ 2.127649] hub 9-0:1.0: hash matches
[ 2.127723] rtc_cmos 00:04: setting system clock to 2014-09-20 21:27:52 UTC (1411248472)
[ 2.127859] acpi-cpufreq: overriding BIOS provided _PSD data
[ 2.128236] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.128237] EDD information not available.
[ 2.128263] PM: Hibernation image not present or could not be loaded.
[ 2.129595] Freeing unused kernel memory: 1360K (ffffffff81d1e000 - ffffffff81e72000)
[ 2.129596] Write protecting the kernel read-only data: 12288k
[ 2.131746] Freeing unused kernel memory: 568K (ffff880001772000 - ffff880001800000)
[ 2.133787] Freeing unused kernel memory: 608K (ffff880001b68000 - ffff880001c00000)
[ 2.144104] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 2.150688] systemd-udevd[143]: starting version 204
[ 2.166994] ahci 0000:00:11.0: version 3.0
[ 2.167275] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[ 2.167279] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 2.169038] scsi0 : ahci
[ 2.169289] scsi1 : ahci
[ 2.169469] scsi2 : ahci
[ 2.169774] scsi3 : ahci
[ 2.169982] scsi4 : ahci
[ 2.170278] scsi5 : ahci
[ 2.170528] ata1: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff100 irq 19
[ 2.170531] ata2: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff180 irq 19
[ 2.170533] ata3: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff200 irq 19
[ 2.170535] ata4: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff280 irq 19
[ 2.170538] ata5: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff300 irq 19
[ 2.170540] ata6: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff380 irq 19
[ 2.173450] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.173463] r8169 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 2.173687] r8169 0000:04:00.0: irq 41 for MSI/MSI-X
[ 2.173995] r8169 0000:04:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000c7c000, 50:e5:49:51:b9:18, XID 0c900800 IRQ 41
[ 2.173997] r8169 0000:04:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 2.345229] usb 2-2: new high-speed USB device number 2 using ehci-pci
[ 2.477837] usb 2-2: New USB device found, idVendor=05e1, idProduct=0408
[ 2.477840] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.477842] usb 2-2: Product: USB 2.0 Video Capture Controller
[ 2.477844] usb 2-2: Manufacturer: Syntek Semiconductor
[ 2.489163] ata3: SATA link down (SStatus 0 SControl 300)
[ 2.489223] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.661035] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.661103] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.661137] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.661160] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.661445] ata2.00: ATA-9: SanDisk SDSSDP128G, 2.0.0, max UDMA/133
[ 2.661448] ata2.00: 250069680 sectors, multi 1: LBA48 NCQ (depth 31/32)
[ 2.661658] ata2.00: configured for UDMA/133
[ 2.662059] ata1.00: ATA-8: WDC WD5000AZRX-00A8LB0, 01.01A01, max UDMA/133
[ 2.662062] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 2.662519] ata6.00: HPA detected: current 976771055, native 976773168
[ 2.662656] ata6.00: ATA-8: WDC WD5000AADS-00M2B0, 01.00A01, max UDMA/133
[ 2.662659] ata6.00: 976771055 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 2.662732] ata4.00: ATAPI: Optiarc DVD RW AD-7260S, 1.03, max UDMA/100
[ 2.663255] ata1.00: configured for UDMA/133
[ 2.663453] scsi 0:0:0:0: Direct-Access ATA WDC WD5000AZRX-0 01.0 PQ: 0 ANSI: 5
[ 2.663621] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.663623] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 2.663628] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.663643] ata6.00: configured for UDMA/133
[ 2.663763] sd 0:0:0:0: [sda] Write Protect is off
[ 2.663766] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.663801] scsi 1:0:0:0: Direct-Access ATA SanDisk SDSSDP12 2.0. PQ: 0 ANSI: 5
[ 2.663811] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.663987] sd 1:0:0:0: [sdb] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[ 2.663993] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 2.664141] sd 1:0:0:0: [sdb] Write Protect is off
[ 2.664144] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.664180] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.664664] ata4.00: configured for UDMA/100
[ 2.664741] sdb: sdb1 sdb2
[ 2.665119] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 2.666151] scsi 3:0:0:0: CD-ROM Optiarc DVD RW AD-7260S 1.03 PQ: 0 ANSI: 5
[ 2.668591] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.668597] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.668877] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 2.668964] sr 3:0:0:0: Attached scsi generic sg2 type 5
[ 2.669117] scsi 5:0:0:0: Direct-Access ATA WDC WD5000AADS-0 01.0 PQ: 0 ANSI: 5
[ 2.669255] sd 5:0:0:0: [sdc] 976771055 512-byte logical blocks: (500 GB/465 GiB)
[ 2.669277] sd 5:0:0:0: Attached scsi generic sg3 type 0
[ 2.669375] sd 5:0:0:0: [sdc] Write Protect is off
[ 2.669378] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2.669417] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.696906] sda: sda1 sda2 sda3 sda4
[ 2.697401] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.752983] tsc: Refined TSC clocksource calibration: 3120.852 MHz
[ 3.056886] usb 5-5: new full-speed USB device number 2 using ohci-pci
[ 3.173085] sdc: sdc1
[ 3.173399] sd 5:0:0:0: [sdc] Attached SCSI disk
[ 3.330827] usb 5-5: New USB device found, idVendor=0a12, idProduct=0001
[ 3.330835] usb 5-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.596695] usb 7-3: new low-speed USB device number 2 using ohci-pci
[ 3.738369] random: nonblocking pool is initialized
[ 3.752916] Switched to clocksource tsc
[ 3.767680] usb 7-3: New USB device found, idVendor=0665, idProduct=5161
[ 3.767688] usb 7-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.767693] usb 7-3: Product: USB to Serial
[ 3.767697] usb 7-3: Manufacturer: INNO TECH
[ 3.767700] usb 7-3: SerialNumber: 20100813
[ 3.777784] hidraw: raw HID events driver (C) Jiri Kosina
[ 3.786765] usbcore: registered new interface driver usbhid
[ 3.786767] usbhid: USB HID core driver
[ 3.789806] hid-generic 0003:0665:5161.0001: hiddev0,hidraw0: USB HID v1.00 Device [INNO TECH USB to Serial] on usb-0000:00:16.0-3/input0
[ 3.908580] usb 4-4: new low-speed USB device number 2 using ohci-pci
[ 4.076605] usb 4-4: New USB device found, idVendor=045e, idProduct=0039
[ 4.076608] usb 4-4: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[ 4.076610] usb 4-4: Product: Microsoft 5-Button Mouse with IntelliEye(TM)
[ 4.076614] usb 4-4: Manufacturer: Microsoft
[ 4.083807] input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:12.0/usb4/4-4/4-4:1.0/input/input3
[ 4.083994] hid-generic 0003:045E:0039.0002: input,hidraw1: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:12.0-4/input0
[ 4.145913] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 4.887527] init: ureadahead main process (227) terminated with status 5
[ 5.420209] Adding 4259836k swap on /dev/sda4. Priority:-1 extents:1 across:4259836k FS
[ 5.903308] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 6.001335] systemd-udevd[325]: starting version 204
[ 6.888842] lp: driver loaded but no devices found
[ 6.962407] it87: Found IT8720F chip at 0x228, revision 8
[ 6.962425] it87: Routing internal VCCH to in7
[ 6.962429] it87: Beeping is supported
[ 7.448381] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 7.688696] wmi: Mapper loaded
[ 7.914494] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SOR1 1 (20131115/utaddress-251)
[ 7.914500] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.923729] MCE: In-kernel MCE decoding enabled.
[ 7.936660] EDAC MC: Ver: 3.0.0
[ 7.949803] AMD64 EDAC driver v3.4.0
[ 7.949824] EDAC amd64: DRAM ECC disabled.
[ 7.949835] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 7.949835] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 7.949835] (Note that use of the override may cause unknown side effects.)
[ 7.998346] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[ 7.998348] AMD IOMMUv2 functionality not available on this system
[ 8.032915] Bluetooth: Core ver 2.17
[ 8.032931] NET: Registered protocol family 31
[ 8.032932] Bluetooth: HCI device and connection manager initialized
[ 8.032938] Bluetooth: HCI socket layer initialized
[ 8.032940] Bluetooth: L2CAP socket layer initialized
[ 8.032945] Bluetooth: SCO socket layer initialized
[ 8.043385] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[ 8.043443] sp5100_tco: PCI Revision ID: 0x42
[ 8.043473] sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
[ 8.043484] sp5100_tco: Last reboot was not triggered by watchdog.
[ 8.043528] sp5100_tco: initialized (0xffffc90000c7eb00). heartbeat=60 sec (nowayout=0)
[ 8.072474] usbcore: registered new interface driver btusb
[ 8.558724] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 8.558726] Disabling lock debugging due to kernel taint
[ 8.562924] fglrx: module verification failed: signature and/or required key missing - tainting kernel
[ 8.567880] <6>[fglrx] Maximum main memory to use for locked dma buffers: 7733 MBytes.
[ 8.568147] <6>[fglrx] vendor: 1002 device: 68b8 count: 1
[ 8.568716] <6>[fglrx] ioport: bar 4, base 0xde00, size: 0x100
[ 8.569079] <6>[fglrx] Kernel PAT support is enabled
[ 8.569095] <6>[fglrx] module loaded - fglrx 13.30.1 [Jan 8 2014] with 1 minors
[ 8.576687] hda-intel 0000:00:14.2: Using LPIB position fix
[ 8.581121] hda-intel 0000:00:14.2: Enable sync_write for stable communication
[ 8.631582] SKU: Nid=0x1d sku_cfg=0x4005e601
[ 8.631585] SKU: port_connectivity=0x1
[ 8.631586] SKU: enable_pcbeep=0x0
[ 8.631587] SKU: check_sum=0x00000005
[ 8.631588] SKU: customization=0x000000e6
[ 8.631589] SKU: external_amp=0x0
[ 8.631590] SKU: platform_type=0x0
[ 8.631591] SKU: swap=0x0
[ 8.631592] SKU: override=0x1
[ 8.632066] autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 8.632067] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 8.632069] hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 8.632070] mono: mono_out=0x0
[ 8.632070] dig-out=0x11/0x1e
[ 8.632071] inputs:
[ 8.632073] Rear Mic=0x18
[ 8.632074] Front Mic=0x19
[ 8.632075] Line=0x1a
[ 8.632076] CD=0x1c
[ 8.632078] realtek: No valid SSID, checking pincfg 0x4005e601 for NID 0x1d
[ 8.632079] realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0889
[ 8.646733] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[ 8.646823] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[ 8.646886] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[ 8.646946] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
[ 8.647009] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
[ 8.647068] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
[ 8.647127] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
[ 8.647184] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input4
[ 8.647502] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
[ 8.647502] hda-intel 0000:01:00.1: Using LPIB position fix
[ 8.647538] snd_hda_intel 0000:01:00.1: irq 42 for MSI/MSI-X
[ 8.649860] hda-intel 0000:01:00.1: Enable sync_write for stable communication
[ 8.679990] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input12
[ 8.813409] Linux video capture interface: v2.00
[ 8.934569] kvm: disabled by bios
[ 8.937152] usb 2-2: New device Syntek Semiconductor USB 2.0 Video Capture Controller @ 480 Mbps (05e1:0408, interface 0, class 0)
[ 8.937155] usb 2-2: video interface 0 found
[ 8.947546] kvm: disabled by bios
[ 8.992770] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 9.319904] type=1400 audit(1411237679.690:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=615 comm="apparmor_parser"
[ 9.320012] type=1400 audit(1411237679.690:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=615 comm="apparmor_parser"
[ 9.320116] type=1400 audit(1411237679.690:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=615 comm="apparmor_parser"
[ 9.323019] type=1400 audit(1411237679.694:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=587 comm="apparmor_parser"
[ 9.323124] type=1400 audit(1411237679.694:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=587 comm="apparmor_parser"
[ 9.323221] type=1400 audit(1411237679.694:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=587 comm="apparmor_parser"
[ 9.616897] init: failsafe main process (750) killed by TERM signal
[ 9.652589] saa7115 0-0025: gm7113c found @ 0x4a (stk1160)
[ 10.283118] stk1160: driver ver 0.9.5 successfully loaded
[ 10.395473] AC'97 0 access is not valid [0x0], removing mixer.
[ 10.395568] stk1160: registers to NTSC like standard
[ 10.474560] stk1160 2-2:1.0: V4L2 device registered as video0
[ 10.474844] usbcore: registered new interface driver stk1160
[ 10.475496] ppdev: user-space parallel port driver
[ 10.526318] Bluetooth: RFCOMM TTY layer initialized
[ 10.526329] Bluetooth: RFCOMM socket layer initialized
[ 10.526335] Bluetooth: RFCOMM ver 1.11
[ 10.574667] usbcore: registered new interface driver snd-usb-audio
[ 10.582159] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 10.582163] Bluetooth: BNEP filters: protocol multicast
[ 10.582171] Bluetooth: BNEP socket layer initialized
[ 10.631436] type=1400 audit(1411237681.002:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=874 comm="apparmor_parser"
[ 10.691702] type=1400 audit(1411237681.062:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=868 comm="apparmor_parser"
[ 10.691887] type=1400 audit(1411237681.062:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=868 comm="apparmor_parser"
[ 10.692030] type=1400 audit(1411237681.062:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=868 comm="apparmor_parser"
[ 12.627527] r8169 0000:04:00.0 eth0: link down
[ 12.627576] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 12.627632] r8169 0000:04:00.0 eth0: link down
[ 12.627856] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 13.639921] init: udev-fallback-graphics main process (954) terminated with status 1
[ 14.257183] r8169 0000:04:00.0 eth0: link up
[ 14.257190] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 15.915486] audit_printk_skb: 24 callbacks suppressed
[ 15.915489] type=1400 audit(1411237686.286:20): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=869 comm="apparmor_parser"
[ 15.916546] type=1400 audit(1411237686.290:21): apparmor="STATUS" operation="profile_load" profile="unconfined" name="launchpad_integration" pid=869 comm="apparmor_parser"
[ 15.916981] type=1400 audit(1411237686.290:22): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=869 comm="apparmor_parser"
[ 15.918387] type=1400 audit(1411237686.290:23): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=869 comm="apparmor_parser"
[ 15.919093] type=1400 audit(1411237686.290:24): apparmor="STATUS" operation="profile_load" profile="unconfined" name="launchpad_integration" pid=869 comm="apparmor_parser"
[ 15.919458] type=1400 audit(1411237686.290:25): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=869 comm="apparmor_parser"
[ 15.920382] type=1400 audit(1411237686.294:26): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-thumbnailer" pid=869 comm="apparmor_parser"
[ 15.920930] type=1400 audit(1411237686.294:27): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=869 comm="apparmor_parser"
[ 16.276554] init: alsa-restore main process (1037) terminated with status 99
[ 17.739434] fglrx_pci 0000:01:00.0: irq 43 for MSI/MSI-X
[ 17.740539] <6>[fglrx] Firegl kernel thread PID: 1475
[ 17.740623] <6>[fglrx] Firegl kernel thread PID: 1476
[ 17.740706] <6>[fglrx] Firegl kernel thread PID: 1477
[ 17.740806] <6>[fglrx] IRQ 43 Enabled
[ 17.750870] <6>[fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 17.750873] <6>[fglrx] Reserved FB block: Unshared offset:f878000, size:4000
[ 17.750874] <6>[fglrx] Reserved FB block: Unshared offset:f87c000, size:484000
[ 17.750875] <6>[fglrx] Reserved FB block: Unshared offset:3fff4000, size:c000
[ 83.294347] conky[2293]: segfault at 0 ip 00007f3bc88c0f61 sp 00007fff8cb8ade8 error 4 in libc-2.15.so[7f3bc8838000+1b5000]
[ 83.296444] conky[2292]: segfault at 0 ip 00007fcd98748f61 sp 00007fff25f789a8 error 4 in libc-2.15.so[7fcd986c0000+1b5000]
[ 88.058877] type=1400 audit(1411237758.428:28): apparmor="DENIED" operation="open" profile="/usr/lib/telepathy/mission-control-5" name="/usr/share/gvfs/remote-volume-monitors/" pid=2351 comm="mission-control" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 304.295660] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 304.312602] JFS: nTxBlock = 8192, nTxLock = 65536
[ 304.346525] NTFS driver 2.1.30 [Flags: R/O MODULE].
[ 304.395126] QNX4 filesystem 0.2.3 registered.
[ 304.421391] xor: automatically using best checksumming function:
[ 304.460561] avx : 7247.000 MB/sec
[ 304.532574] raid6: sse2x1 5051 MB/s
[ 304.600585] raid6: sse2x2 9517 MB/s
[ 304.668587] raid6: sse2x4 12042 MB/s
[ 304.668589] raid6: using algorithm sse2x4 (12042 MB/s)
[ 304.668590] raid6: using ssse3x2 recovery algorithm
[ 304.745105] bio: create slab <bio-1> at 1
[ 304.745974] Btrfs loaded
[ 333.844811] type=1400 audit(1411238004.173:29): apparmor="DENIED" operation="capable" profile="/usr/sbin/cupsd" pid=910 comm="cupsd" capability=36 capname="block_suspend"
[ 380.738189] type=1400 audit(1411238051.062:30): apparmor="DENIED" operation="capable" profile="/usr/sbin/cupsd" pid=910 comm="cupsd" capability=36 capname="block_suspend"
[ 797.777601] conky[7252]: segfault at 0 ip 00007ffea9d58f61 sp 00007fffab73cea8 error 4 in libc-2.15.so[7ffea9cd0000+1b5000]
[ 797.792223] conky[7253]: segfault at 0 ip 00007f9590860f61 sp 00007fff8ce792e8 error 4 in libc-2.15.so[7f95907d8000+1b5000]
[ 803.227386] type=1400 audit(1411238473.648:31): apparmor="DENIED" operation="open" profile="/usr/lib/telepathy/mission-control-5" name="/usr/share/gvfs/remote-volume-monitors/" pid=7323 comm="mission-control" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 1087.682970] type=1400 audit(1411238758.204:32): apparmor="DENIED" operation="capable" profile="/usr/sbin/cupsd" pid=910 comm="cupsd" capability=36 capname="block_suspend"
spiros@spiros-GA-990FXA-D3:~$


[the_eye]

Το πρόβλημα είναι εδώ

Κώδικας: Επιλογή όλων

init: alsa-restore main process (1037) terminated with status 99

υπάρχει και αυτό το bug Launchpad bug: #1002392 αλλά δεν υπάρχουν άλλες πληροφορίες.

[spirosmeg]

Κατάλαβα προφανώς έκανε update στον πυρινα και βγήκε bug αλλά έπρεπε όταν μπουταρα με προηγούμενο πυρήνα (όπως και έκανα) να είχα ήχο ετσι δεν είναι?
Έλα όμως που εξαφάνισε την κάρτα και απο τους 2 προηγούμενους που έχω...
Δεν πάμε καλά και η σκασμένη 14.04 δεν κάθετε καλά στον hardware μου δεν ξέρω τι να πω πρώτη φορά μετά από τόσα χρόνια βγάζω την δυσαρέσκιά μου
το εδωσα και εγω το bug εδω: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1371989
Τα αγγλικά μου άθλια δεν μπορώ να περιγράψω κατι καλύτερο...

[the_eye]

Όχι δεν είναι update σε πυρήνα. Κάτι συμβαίνει με το σύστημα ήχου alsa.

Δεν μου απάντησες για το ppa που έχεις βάλει.

[spirosmeg]

Καλημερα
ppas εχεις δίκιο ξεχάστηκα χρησιμοποιώ αυτά:

[the_eye]

Πιστεύω ότι κάποιο ppa σου δημιουργεί το πρόβλημα.

[spirosmeg]

Λες μου περασε και εμενα η ιδεα αυτη αλλα ποιο ομως αυτο ειναι τωρα...