Δημοσιεύτηκε: 16 Μαρ 2014, 18:37
the_eye έγραψε:Μας ενδιαφέρουν από την έκδοση που υπάρχει το πρόβλημα. Βάλε ένα livecd της 12.04 χ64 ή 14.04 χ64 και δώσε μας πάλι το αποτέλεσμα.
ubuntu 14.04 64
dmesg
- Κώδικας: Επιλογή όλων
[ 3.550637] usb usb9: Manufacturer: Linux 3.11.0-15-generic xhci_hcd
[ 3.550638] usb usb9: SerialNumber: 0000:02:00.0
[ 3.550683] xHCI xhci_add_endpoint called for root hub
[ 3.550684] xHCI xhci_check_bandwidth called for root hub
[ 3.550697] hub 9-0:1.0: USB hub found
[ 3.550701] hub 9-0:1.0: 2 ports detected
[ 3.558228] xhci_hcd 0000:04:00.0: xHCI Host Controller
[ 3.558234] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 10
[ 3.558320] xhci_hcd 0000:04:00.0: irq 73 for MSI/MSI-X
[ 3.558358] usb usb10: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.558359] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.558361] usb usb10: Product: xHCI Host Controller
[ 3.558362] usb usb10: Manufacturer: Linux 3.11.0-15-generic xhci_hcd
[ 3.558363] usb usb10: SerialNumber: 0000:04:00.0
[ 3.558434] xHCI xhci_add_endpoint called for root hub
[ 3.558435] xHCI xhci_check_bandwidth called for root hub
[ 3.558449] hub 10-0:1.0: USB hub found
[ 3.558454] hub 10-0:1.0: 2 ports detected
[ 3.558499] xhci_hcd 0000:04:00.0: xHCI Host Controller
[ 3.558501] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 11
[ 3.558517] usb usb11: New USB device found, idVendor=1d6b, idProduct=0003
[ 3.558519] usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.558520] usb usb11: Product: xHCI Host Controller
[ 3.558521] usb usb11: Manufacturer: Linux 3.11.0-15-generic xhci_hcd
[ 3.558522] usb usb11: SerialNumber: 0000:04:00.0
[ 3.558566] xHCI xhci_add_endpoint called for root hub
[ 3.558567] xHCI xhci_check_bandwidth called for root hub
[ 3.558579] hub 11-0:1.0: USB hub found
[ 3.558583] hub 11-0:1.0: 2 ports detected
[ 3.570227] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 3.570558] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.570561] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.570661] mousedev: PS/2 mouse device common for all mice
[ 3.570782] rtc_cmos 00:05: RTC can wake from S4
[ 3.570872] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 3.570892] rtc_cmos 00:05: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 3.570933] device-mapper: uevent: version 1.0.3
[ 3.570978] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com
[ 3.571029] cpuidle: using governor ladder
[ 3.571030] cpuidle: using governor menu
[ 3.571037] ledtrig-cpu: registered to indicate activity on CPUs
[ 3.571097] TCP: cubic registered
[ 3.571163] NET: Registered protocol family 10
[ 3.571297] NET: Registered protocol family 17
[ 3.571303] Key type dns_resolver registered
[ 3.571546] PM: Hibernation image not present or could not be loaded.
[ 3.571548] Loading module verification certificates
[ 3.572288] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: e20ade5b3af83aaa8563f0ef4119a030c4d3ffdb'
[ 3.572296] registered taskstats version 1
[ 3.573953] Key type trusted registered
[ 3.575216] Key type encrypted registered
[ 3.576462] AppArmor: AppArmor sha1 policy hashing enabled
[ 3.576697] Magic number: 6:209:182
[ 3.576769] rtc_cmos 00:05: setting system clock to 2014-03-15 14:12:01 UTC (1394892721)
[ 3.576858] acpi-cpufreq: overriding BIOS provided _PSD data
[ 3.576952] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 3.576953] EDD information not available.
[ 3.578150] Freeing unused kernel memory: 1392K (ffffffff81d0f000 - ffffffff81e6b000)
[ 3.578152] Write protecting the kernel read-only data: 12288k
[ 3.579597] Freeing unused kernel memory: 672K (ffff880001758000 - ffff880001800000)
[ 3.579652] Freeing unused kernel memory: 20K (ffff880001bfb000 - ffff880001c00000)
[ 3.593262] udevd[120]: starting version 175
[ 3.612219] ahci 0000:00:11.0: version 3.0
[ 3.612405] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[ 3.612408] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 3.613592] scsi0 : ahci
[ 3.615354] scsi1 : ahci
[ 3.617461] scsi2 : ahci
[ 3.617691] scsi3 : ahci
[ 3.617774] scsi4 : ahci
[ 3.618266] scsi5 : ahci
[ 3.618332] ata1: SATA max UDMA/133 abar m1024@0xfe40b000 port 0xfe40b100 irq 19
[ 3.618334] ata2: SATA max UDMA/133 abar m1024@0xfe40b000 port 0xfe40b180 irq 19
[ 3.618337] ata3: SATA max UDMA/133 abar m1024@0xfe40b000 port 0xfe40b200 irq 19
[ 3.618339] ata4: SATA max UDMA/133 abar m1024@0xfe40b000 port 0xfe40b280 irq 19
[ 3.618340] ata5: SATA max UDMA/133 abar m1024@0xfe40b000 port 0xfe40b300 irq 19
[ 3.618342] ata6: SATA max UDMA/133 abar m1024@0xfe40b000 port 0xfe40b380 irq 19
[ 3.618634] wmi: Mapper loaded
[ 3.618994] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 3.619004] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 3.619216] r8169 0000:03:00.0: irq 74 for MSI/MSI-X
[ 3.619351] r8169 0000:03:00.0 eth0: RTL8168evl/8111evl at 0xffffc9000064e000, 94:de:80:78:2a:2d, XID 0c900800 IRQ 74
[ 3.619353] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 3.627938] [drm] Initialized drm 1.1.0 20060810
[ 3.644517] MXM: GUID detected in BIOS
[ 3.644778] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x0e6020a1
[ 3.644782] nouveau [ DEVICE][0000:01:00.0] Chipset: GK106 (NVE6)
[ 3.644783] nouveau [ DEVICE][0000:01:00.0] Family : NVE0
[ 3.645359] nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image...
[ 3.645365] nouveau [ VBIOS][0000:01:00.0] ... signature not found
[ 3.645366] nouveau [ VBIOS][0000:01:00.0] checking PROM for image...
[ 3.756607] nouveau [ VBIOS][0000:01:00.0] ... appears to be valid
[ 3.756608] nouveau [ VBIOS][0000:01:00.0] using image from PROM
[ 3.756713] nouveau [ VBIOS][0000:01:00.0] BIT signature found
[ 3.756715] nouveau [ VBIOS][0000:01:00.0] version 80.06.59.00.1a
[ 3.756997] nouveau [ PFB][0000:01:00.0] RAM type: GDDR5
[ 3.756999] nouveau [ PFB][0000:01:00.0] RAM size: 2048 MiB
[ 3.757000] nouveau [ PFB][0000:01:00.0] ZCOMP: 0 tags
[ 3.779204] nouveau [ PTHERM][0000:01:00.0] FAN control: none / external
[ 3.779210] nouveau [ PTHERM][0000:01:00.0] fan management: disabled
[ 3.779212] nouveau [ PTHERM][0000:01:00.0] internal sensor: yes
[ 3.793523] [TTM] Zone kernel: Available graphics memory: 2044946 kiB
[ 3.793524] [TTM] Initializing pool allocator
[ 3.793528] [TTM] Initializing DMA pool allocator
[ 3.793535] nouveau [ DRM] VRAM: 2048 MiB
[ 3.793536] nouveau [ DRM] GART: 1048576 MiB
[ 3.793539] nouveau [ DRM] TMDS table version 2.0
[ 3.793540] nouveau [ DRM] DCB version 4.0
[ 3.793541] nouveau [ DRM] DCB outp 00: 02000f00 00000000
[ 3.793543] nouveau [ DRM] DCB outp 01: 01000f02 00020030
[ 3.793544] nouveau [ DRM] DCB outp 03: 02011f62 00020010
[ 3.793545] nouveau [ DRM] DCB outp 04: 04822fb6 0f420010
[ 3.793547] nouveau [ DRM] DCB outp 05: 04022f72 00020010
[ 3.793548] nouveau [ DRM] DCB outp 06: 08033f82 00020030
[ 3.793549] nouveau [ DRM] DCB conn 00: 00001030
[ 3.793551] nouveau [ DRM] DCB conn 01: 00010161
[ 3.793552] nouveau [ DRM] DCB conn 02: 00020246
[ 3.793553] nouveau [ DRM] DCB conn 03: 01000331
[ 3.794556] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 3.794557] [drm] No driver support for vblank timestamp query.
[ 3.794611] nouveau W[ DRM] voltage table 0x50 unknown
[ 3.794614] nouveau [ DRM] 4 available performance level(s)
[ 3.794617] nouveau [ DRM] 0: core 162MHz shader 324MHz memory 648MHz voltage 100mV
[ 3.794619] nouveau [ DRM] 1: core 405MHz shader 810MHz memory 1080MHz voltage 80mV
[ 3.794621] nouveau [ DRM] 2: core 1502MHz shader 3004MHz memory 1080MHz voltage 60mV
[ 3.794623] nouveau [ DRM] 3: core 1502MHz shader 3004MHz memory 1080MHz voltage 40mV
[ 3.794624] nouveau [ DRM] c:
[ 3.803882] nouveau [ DRM] MM: using COPY for buffer copies
[ 3.882356] firewire_ohci 0000:05:0e.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
[ 3.938405] ata2: SATA link down (SStatus 0 SControl 300)
[ 3.938446] ata3: SATA link down (SStatus 0 SControl 300)
[ 3.942397] ata5: SATA link down (SStatus 0 SControl 300)
[ 3.945191] nouveau [ DRM] allocated 1280x1024 fb: 0x80000, bo ffff880127700800
[ 3.945253] fbcon: nouveaufb (fb0) is primary device
[ 3.946438] ata6: SATA link down (SStatus 0 SControl 300)
[ 4.018282] Console: switching to colour frame buffer device 160x64
[ 4.019296] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[ 4.019298] nouveau 0000:01:00.0: registered panic notifier
dmesg μετά απο επανεκκίνηση
- Κώδικας: Επιλογή όλων
[ 3.558722] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.558723] usb usb7: Product: OHCI PCI host controller
[ 3.558724] usb usb7: Manufacturer: Linux 3.11.0-15-generic ohci_hcd
[ 3.558726] usb usb7: SerialNumber: 0000:00:16.0
[ 3.558863] hub 7-0:1.0: USB hub found
[ 3.558867] hub 7-0:1.0: 4 ports detected
[ 3.558970] ohci-platform: OHCI generic platform driver
[ 3.558994] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.559109] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 3.559115] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 8
[ 3.559203] xhci_hcd 0000:02:00.0: irq 72 for MSI/MSI-X
[ 3.559240] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.559242] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.559243] usb usb8: Product: xHCI Host Controller
[ 3.559244] usb usb8: Manufacturer: Linux 3.11.0-15-generic xhci_hcd
[ 3.559245] usb usb8: SerialNumber: 0000:02:00.0
[ 3.559347] xHCI xhci_add_endpoint called for root hub
[ 3.559348] xHCI xhci_check_bandwidth called for root hub
[ 3.559362] hub 8-0:1.0: USB hub found
[ 3.559366] hub 8-0:1.0: 2 ports detected
[ 3.559410] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 3.559412] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 9
[ 3.559426] usb usb9: New USB device found, idVendor=1d6b, idProduct=0003
[ 3.559428] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.559429] usb usb9: Product: xHCI Host Controller
[ 3.559430] usb usb9: Manufacturer: Linux 3.11.0-15-generic xhci_hcd
[ 3.559431] usb usb9: SerialNumber: 0000:02:00.0
[ 3.559496] xHCI xhci_add_endpoint called for root hub
[ 3.559497] xHCI xhci_check_bandwidth called for root hub
[ 3.559508] hub 9-0:1.0: USB hub found
[ 3.559512] hub 9-0:1.0: 2 ports detected
[ 3.566892] xhci_hcd 0000:04:00.0: xHCI Host Controller
[ 3.566899] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 10
[ 3.566983] xhci_hcd 0000:04:00.0: irq 73 for MSI/MSI-X
[ 3.567021] usb usb10: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.567022] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.567024] usb usb10: Product: xHCI Host Controller
[ 3.567025] usb usb10: Manufacturer: Linux 3.11.0-15-generic xhci_hcd
[ 3.567026] usb usb10: SerialNumber: 0000:04:00.0
[ 3.567120] xHCI xhci_add_endpoint called for root hub
[ 3.567121] xHCI xhci_check_bandwidth called for root hub
[ 3.567136] hub 10-0:1.0: USB hub found
[ 3.567142] hub 10-0:1.0: 2 ports detected
[ 3.567188] xhci_hcd 0000:04:00.0: xHCI Host Controller
[ 3.567191] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 11
[ 3.567205] usb usb11: New USB device found, idVendor=1d6b, idProduct=0003
[ 3.567206] usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.567208] usb usb11: Product: xHCI Host Controller
[ 3.567209] usb usb11: Manufacturer: Linux 3.11.0-15-generic xhci_hcd
[ 3.567210] usb usb11: SerialNumber: 0000:04:00.0
[ 3.567272] xHCI xhci_add_endpoint called for root hub
[ 3.567273] xHCI xhci_check_bandwidth called for root hub
[ 3.567286] hub 11-0:1.0: USB hub found
[ 3.567290] hub 11-0:1.0: 2 ports detected
[ 3.578967] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 3.579450] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.579468] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.579804] mousedev: PS/2 mouse device common for all mice
[ 3.580092] rtc_cmos 00:05: RTC can wake from S4
[ 3.580272] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 3.580303] rtc_cmos 00:05: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 3.580469] device-mapper: uevent: version 1.0.3
[ 3.580620] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com
[ 3.580733] cpuidle: using governor ladder
[ 3.580738] cpuidle: using governor menu
[ 3.580764] ledtrig-cpu: registered to indicate activity on CPUs
[ 3.580974] TCP: cubic registered
[ 3.581220] NET: Registered protocol family 10
[ 3.581694] NET: Registered protocol family 17
[ 3.581719] Key type dns_resolver registered
[ 3.582522] PM: Hibernation image not present or could not be loaded.
[ 3.582530] Loading module verification certificates
[ 3.585675] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: e20ade5b3af83aaa8563f0ef4119a030c4d3ffdb'
[ 3.585700] registered taskstats version 1
[ 3.587861] Key type trusted registered
[ 3.589503] Key type encrypted registered
[ 3.591106] AppArmor: AppArmor sha1 policy hashing enabled
[ 3.591705] Magic number: 6:458:740
[ 3.591847] rtc_cmos 00:05: setting system clock to 2014-03-16 15:44:39 UTC (1394984679)
[ 3.592091] acpi-cpufreq: overriding BIOS provided _PSD data
[ 3.592450] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 3.592451] EDD information not available.
[ 3.593634] Freeing unused kernel memory: 1392K (ffffffff81d0f000 - ffffffff81e6b000)
[ 3.593636] Write protecting the kernel read-only data: 12288k
[ 3.595097] Freeing unused kernel memory: 672K (ffff880001758000 - ffff880001800000)
[ 3.595154] Freeing unused kernel memory: 20K (ffff880001bfb000 - ffff880001c00000)
[ 3.608679] udevd[121]: starting version 175
[ 3.625352] ahci 0000:00:11.0: version 3.0
[ 3.625540] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[ 3.625543] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 3.627458] scsi0 : ahci
[ 3.627692] scsi1 : ahci
[ 3.627948] scsi2 : ahci
[ 3.628011] scsi3 : ahci
[ 3.628057] scsi4 : ahci
[ 3.628104] scsi5 : ahci
[ 3.628152] ata1: SATA max UDMA/133 abar m1024@0xfe40b000 port 0xfe40b100 irq 19
[ 3.628155] ata2: SATA max UDMA/133 abar m1024@0xfe40b000 port 0xfe40b180 irq 19
[ 3.628156] ata3: SATA max UDMA/133 abar m1024@0xfe40b000 port 0xfe40b200 irq 19
[ 3.628158] ata4: SATA max UDMA/133 abar m1024@0xfe40b000 port 0xfe40b280 irq 19
[ 3.628160] ata5: SATA max UDMA/133 abar m1024@0xfe40b000 port 0xfe40b300 irq 19
[ 3.628162] ata6: SATA max UDMA/133 abar m1024@0xfe40b000 port 0xfe40b380 irq 19
[ 3.641181] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 3.641194] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 3.641404] r8169 0000:03:00.0: irq 74 for MSI/MSI-X
[ 3.641545] r8169 0000:03:00.0 eth0: RTL8168evl/8111evl at 0xffffc9000065c000, 94:de:80:78:2a:2d, XID 0c900800 IRQ 74
[ 3.641547] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 3.644268] wmi: Mapper loaded
[ 3.656029] [drm] Initialized drm 1.1.0 20060810
[ 3.670273] MXM: GUID detected in BIOS
[ 3.670563] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x0e6020a1
[ 3.670567] nouveau [ DEVICE][0000:01:00.0] Chipset: GK106 (NVE6)
[ 3.670568] nouveau [ DEVICE][0000:01:00.0] Family : NVE0
[ 3.671158] nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image...
[ 3.671164] nouveau [ VBIOS][0000:01:00.0] ... signature not found
[ 3.671165] nouveau [ VBIOS][0000:01:00.0] checking PROM for image...
[ 3.781954] nouveau [ VBIOS][0000:01:00.0] ... appears to be valid
[ 3.781955] nouveau [ VBIOS][0000:01:00.0] using image from PROM
[ 3.782060] nouveau [ VBIOS][0000:01:00.0] BIT signature found
[ 3.782062] nouveau [ VBIOS][0000:01:00.0] version 80.06.59.00.1a
[ 3.782329] nouveau [ PFB][0000:01:00.0] RAM type: GDDR5
[ 3.782331] nouveau [ PFB][0000:01:00.0] RAM size: 2048 MiB
[ 3.782332] nouveau [ PFB][0000:01:00.0] ZCOMP: 0 tags
[ 3.804537] nouveau [ PTHERM][0000:01:00.0] FAN control: none / external
[ 3.804541] nouveau [ PTHERM][0000:01:00.0] fan management: disabled
[ 3.804544] nouveau [ PTHERM][0000:01:00.0] internal sensor: yes
[ 3.818751] firewire_ohci 0000:05:0e.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
[ 3.818775] [TTM] Zone kernel: Available graphics memory: 2044946 kiB
[ 3.818776] [TTM] Initializing pool allocator
[ 3.818779] [TTM] Initializing DMA pool allocator
[ 3.818786] nouveau [ DRM] VRAM: 2048 MiB
[ 3.818787] nouveau [ DRM] GART: 1048576 MiB
[ 3.818790] nouveau [ DRM] TMDS table version 2.0
[ 3.818791] nouveau [ DRM] DCB version 4.0
[ 3.818793] nouveau [ DRM] DCB outp 00: 02000f00 00000000
[ 3.818794] nouveau [ DRM] DCB outp 01: 01000f02 00020030
[ 3.818795] nouveau [ DRM] DCB outp 03: 02011f62 00020010
[ 3.818796] nouveau [ DRM] DCB outp 04: 04822fb6 0f420010
[ 3.818798] nouveau [ DRM] DCB outp 05: 04022f72 00020010
[ 3.818799] nouveau [ DRM] DCB outp 06: 08033f82 00020030
[ 3.818801] nouveau [ DRM] DCB conn 00: 00001030
[ 3.818803] nouveau [ DRM] DCB conn 01: 00010161
[ 3.818805] nouveau [ DRM] DCB conn 02: 00020246
[ 3.818807] nouveau [ DRM] DCB conn 03: 01000331
[ 3.819796] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 3.819797] [drm] No driver support for vblank timestamp query.
[ 3.819850] nouveau W[ DRM] voltage table 0x50 unknown
[ 3.819853] nouveau [ DRM] 4 available performance level(s)
[ 3.819856] nouveau [ DRM] 0: core 162MHz shader 324MHz memory 648MHz voltage 100mV
[ 3.819858] nouveau [ DRM] 1: core 405MHz shader 810MHz memory 1080MHz voltage 80mV
[ 3.819860] nouveau [ DRM] 2: core 1502MHz shader 3004MHz memory 1080MHz voltage 60mV
[ 3.819862] nouveau [ DRM] 3: core 1502MHz shader 3004MHz memory 1080MHz voltage 40mV
[ 3.819863] nouveau [ DRM] c:
[ 3.829118] nouveau [ DRM] MM: using COPY for buffer copies
[ 3.946972] ata2: SATA link down (SStatus 0 SControl 300)
[ 3.950973] ata5: SATA link down (SStatus 0 SControl 300)
[ 3.951038] ata6: SATA link down (SStatus 0 SControl 300)
[ 3.951079] ata3: SATA link down (SStatus 0 SControl 300)
[ 3.969717] nouveau [ DRM] allocated 1280x1024 fb: 0x80000, bo ffff880128012000
[ 3.969788] fbcon: nouveaufb (fb0) is primary device
[ 4.051782] Console: switching to colour frame buffer device 160x64
[ 4.052795] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[ 4.052796] nouveau 0000:01:00.0: registered panic notifier
[ 4.052799] [drm] Initialized nouveau 1.1.1 20120801 for 0000:01:00.0 on minor 0
[ 4.123065] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.124702] ata4.00: ATAPI: Optiarc DVD RW AD-5260S, 1.00, max UDMA/100
[ 4.126842] ata4.00: configured for UDMA/100
[ 4.194487] xor: measuring software checksum speed
[ 4.227142] usb 7-1: new low-speed USB device number 2 using ohci-pci
[ 4.231122] prefetch64-sse: 13289.000 MB/sec
[ 4.231143] tsc: Refined TSC clocksource calibration: 3415.596 MHz
[ 4.271136] generic_sse: 12907.000 MB/sec
[ 4.271137] xor: using function: prefetch64-sse (13289.000 MB/sec)
[ 4.339194] raid6: sse2x1 4570 MB/s
[ 4.367227] usb 7-1: device descriptor read/64, error -32
[ 4.407235] raid6: sse2x2 7427 MB/s
[ 4.475280] raid6: sse2x4 8601 MB/s
[ 4.475281] raid6: using algorithm sse2x4 (8601 MB/s)
[ 4.475282] raid6: using intx1 recovery algorithm
[ 4.475377] firewire_core 0000:05:0e.0: created device fw0: GUID 0049e550e5d20b00, S400
[ 4.485764] bio: create slab <bio-1> at 1
[ 4.485938] Btrfs loaded
[ 4.493548] device-mapper: dm-raid45: initialized v0.2594b
[ 4.611420] usb 7-1: device descriptor read/64, error -32
[ 4.847583] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.848176] ata1.00: ATA-7: Maxtor 6Y120M0, YAR51EW0, max UDMA/133
[ 4.848179] ata1.00: 240121728 sectors, multi 0: LBA
[ 4.848851] ata1.00: configured for UDMA/133
[ 4.848995] scsi 0:0:0:0: Direct-Access ATA Maxtor 6Y120M0 YAR5 PQ: 0 ANSI: 5
[ 4.849146] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.849172] sd 0:0:0:0: [sda] 240121728 512-byte logical blocks: (122 GB/114 GiB)
[ 4.849233] sd 0:0:0:0: [sda] Write Protect is off
[ 4.849235] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.849273] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.850724] scsi 3:0:0:0: CD-ROM Optiarc DVD RW AD-5260S 1.00 PQ: 0 ANSI: 5
[ 4.851541] usb 7-1: new low-speed USB device number 3 using ohci-pci
[ 4.853369] sr0: scsi3-mmc drive: 94x/94x writer cd/rw xa/form2 cdda tray
[ 4.853372] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 4.853472] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 4.853573] sr 3:0:0:0: Attached scsi generic sg1 type 5
[ 4.920219] sda: sda1 sda4 < sda5 sda6 sda7 >
[ 4.920649] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.991666] usb 7-1: device descriptor read/64, error -32
[ 5.231901] Switched to clocksource tsc
[ 5.235825] usb 7-1: device descriptor read/64, error -32
[ 5.507963] usb 7-1: new low-speed USB device number 4 using ohci-pci
[ 5.916281] usb 7-1: device not accepting address 4, error -32
[ 6.052368] usb 7-1: new low-speed USB device number 5 using ohci-pci
[ 6.460631] usb 7-1: device not accepting address 5, error -32
[ 6.460661] hub 7-0:1.0: unable to enumerate USB device on port 1
[ 6.600727] usb 7-2: new full-speed USB device number 6 using ohci-pci
[ 6.649089] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 6.740829] usb 7-2: device descriptor read/64, error -32
[ 6.800305] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[ 6.984996] usb 7-2: device descriptor read/64, error -32
[ 7.225144] usb 7-2: new full-speed USB device number 7 using ohci-pci
[ 7.365231] usb 7-2: device descriptor read/64, error -32
[ 7.430829] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 7.433233] ISO 9660 Extensions: RRIP_1991A
[ 7.609363] usb 7-2: device descriptor read/64, error -32
[ 7.769688] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 7.849553] usb 7-2: new full-speed USB device number 8 using ohci-pci
[ 8.257829] usb 7-2: device not accepting address 8, error -32
[ 8.393915] usb 7-2: new full-speed USB device number 9 using ohci-pci
[ 8.802183] usb 7-2: device not accepting address 9, error -32
[ 8.802211] hub 7-0:1.0: unable to enumerate USB device on port 2
[ 42.003251] Adding 3070968k swap on /dev/sda6. Priority:-1 extents:1 across:3070968k FS
[ 42.248469] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 42.416260] udevd[1395]: starting version 175
[ 47.001758] device-mapper: multipath: version 1.5.1 loaded
[ 47.081503] Bluetooth: Core ver 2.16
[ 47.081524] NET: Registered protocol family 31
[ 47.081525] Bluetooth: HCI device and connection manager initialized
[ 47.081533] Bluetooth: HCI socket layer initialized
[ 47.081534] Bluetooth: L2CAP socket layer initialized
[ 47.081538] Bluetooth: SCO socket layer initialized
[ 47.345956] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 47.572403] Bluetooth: RFCOMM TTY layer initialized
[ 47.572412] Bluetooth: RFCOMM socket layer initialized
[ 47.572413] Bluetooth: RFCOMM ver 1.11
[ 47.652385] MCE: In-kernel MCE decoding enabled.
[ 47.700863] EDAC MC: Ver: 3.0.0
[ 47.738936] lp: driver loaded but no devices found
[ 47.805742] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[ 47.805802] sp5100_tco: PCI Revision ID: 0x42
[ 47.805832] sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
[ 47.805842] sp5100_tco: Last reboot was not triggered by watchdog.
[ 47.805882] sp5100_tco: initialized (0xffffc900107ceb00). heartbeat=60 sec (nowayout=0)
[ 47.893071] AMD64 EDAC driver v3.4.0
[ 47.893111] EDAC amd64: DRAM ECC disabled.
[ 47.893119] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 47.893119] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 47.893119] (Note that use of the override may cause unknown side effects.)
[ 47.902794] init: failsafe main process (1577) killed by TERM signal
[ 48.053201] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 48.053203] Bluetooth: BNEP filters: protocol multicast
[ 48.053211] Bluetooth: BNEP socket layer initialized
[ 48.222671] ppdev: user-space parallel port driver
[ 52.212360] hda-intel 0000:00:14.2: Using LPIB position fix
[ 52.215873] hda-intel 0000:00:14.2: Enable sync_write for stable communication
[ 52.759389] SKU: Nid=0x1d sku_cfg=0x4005e601
[ 52.759391] SKU: port_connectivity=0x1
[ 52.759392] SKU: enable_pcbeep=0x0
[ 52.759393] SKU: check_sum=0x00000005
[ 52.759394] SKU: customization=0x000000e6
[ 52.759395] SKU: external_amp=0x0
[ 52.759395] SKU: platform_type=0x0
[ 52.759396] SKU: swap=0x0
[ 52.759397] SKU: override=0x1
[ 52.759819] autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 52.759821] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 52.759822] hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 52.759822] mono: mono_out=0x0
[ 52.759823] dig-out=0x11/0x1e
[ 52.759824] inputs:
[ 52.759825] Front Mic=0x19
[ 52.759826] Rear Mic=0x18
[ 52.759827] Line=0x1a
[ 52.759828] realtek: No valid SSID, checking pincfg 0x4005e601 for NID 0x1d
[ 52.759829] realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0889
[ 52.774034] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input2
[ 52.774100] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input3
[ 52.774148] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input4
[ 52.774195] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
[ 52.774241] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
[ 52.774287] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
[ 52.774334] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
[ 52.774380] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[ 52.774646] hda_intel: Disabling MSI
[ 52.774657] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
[ 52.774686] hda-intel 0000:01:00.1: Disabling 64bit DMA
[ 52.777602] hda-intel 0000:01:00.1: Enable delay in RIRB handling
[ 53.547875] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input10
[ 53.547941] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input11
[ 53.547996] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input12
[ 53.548057] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input13
[ 57.276300] r8169 0000:03:00.0 eth0: link down
[ 57.276343] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 57.276561] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 58.190478] init: alsa-restore main process (1855) terminated with status 99
[ 77.435656] usb 7-1: new low-speed USB device number 10 using ohci-pci
[ 77.575751] usb 7-1: device descriptor read/64, error -32
[ 77.819909] usb 7-1: device descriptor read/64, error -32
[ 78.060069] usb 7-1: new low-speed USB device number 11 using ohci-pci
[ 78.200167] usb 7-1: device descriptor read/64, error -32
[ 78.444331] usb 7-1: device descriptor read/64, error -32
[ 78.684483] usb 7-1: new low-speed USB device number 12 using ohci-pci
[ 79.092723] usb 7-1: device not accepting address 12, error -32
[ 79.228812] usb 7-1: new low-speed USB device number 13 using ohci-pci
[ 79.637115] usb 7-1: device not accepting address 13, error -32
[ 79.637150] hub 7-0:1.0: unable to enumerate USB device on port 1
[ 79.773191] usb 7-2: new full-speed USB device number 14 using ohci-pci
[ 79.913300] usb 7-2: device descriptor read/64, error -32
[ 80.157458] usb 7-2: device descriptor read/64, error -32
[ 80.397594] usb 7-2: new full-speed USB device number 15 using ohci-pci
[ 80.537702] usb 7-2: device descriptor read/64, error -32
[ 80.781866] usb 7-2: device descriptor read/64, error -32
[ 81.022023] usb 7-2: new full-speed USB device number 16 using ohci-pci
[ 81.430270] usb 7-2: device not accepting address 16, error -32
[ 81.566352] usb 7-2: new full-speed USB device number 17 using ohci-pci
[ 81.974657] usb 7-2: device not accepting address 17, error -32
[ 81.974670] hub 7-0:1.0: unable to enumerate USB device on port 2
[ 82.186798] usb 7-1: new low-speed USB device number 18 using ohci-pci
[ 82.326884] usb 7-1: device descriptor read/64, error -32
[ 82.571046] usb 7-1: device descriptor read/64, error -32
[ 82.811206] usb 7-1: new low-speed USB device number 19 using ohci-pci
[ 82.951294] usb 7-1: device descriptor read/64, error -32
[ 83.195458] usb 7-1: device descriptor read/64, error -32
[ 83.435620] usb 7-1: new low-speed USB device number 20 using ohci-pci
[ 83.843886] usb 7-1: device not accepting address 20, error -32
[ 83.979982] usb 7-1: new low-speed USB device number 21 using ohci-pci
[ 84.388246] usb 7-1: device not accepting address 21, error -32
[ 84.388281] hub 7-0:1.0: unable to enumerate USB device on port 1
[ 84.524344] usb 7-2: new full-speed USB device number 22 using ohci-pci
[ 84.664431] usb 7-2: device descriptor read/64, error -32
[ 84.908596] usb 7-2: device descriptor read/64, error -32
[ 85.148754] usb 7-2: new full-speed USB device number 23 using ohci-pci
[ 85.288843] usb 7-2: device descriptor read/64, error -32
[ 85.532986] usb 7-2: device descriptor read/64, error -32
[ 85.773165] usb 7-2: new full-speed USB device number 24 using ohci-pci
[ 86.181435] usb 7-2: device not accepting address 24, error -32
[ 86.317512] usb 7-2: new full-speed USB device number 25 using ohci-pci
[ 86.725797] usb 7-2: device not accepting address 25, error -32
[ 86.725831] hub 7-0:1.0: unable to enumerate USB device on port 2
[ 86.937906] usb 7-1: new low-speed USB device number 26 using ohci-pci
[ 87.078031] usb 7-1: device descriptor read/64, error -32
[ 87.322192] usb 7-1: device descriptor read/64, error -32
[ 87.562328] usb 7-1: new low-speed USB device number 27 using ohci-pci
[ 87.702442] usb 7-1: device descriptor read/64, error -32
[ 87.946605] usb 7-1: device descriptor read/64, error -32
[ 88.186766] usb 7-1: new low-speed USB device number 28 using ohci-pci
[ 88.595047] usb 7-1: device not accepting address 28, error -32
[ 88.731147] usb 7-1: new low-speed USB device number 29 using ohci-pci
[ 89.139409] usb 7-1: device not accepting address 29, error -32
[ 89.139441] hub 7-0:1.0: unable to enumerate USB device on port 1
[ 89.275499] usb 7-2: new full-speed USB device number 30 using ohci-pci
[ 89.415593] usb 7-2: device descriptor read/64, error -32
[ 89.659754] usb 7-2: device descriptor read/64, error -32
[ 89.899916] usb 7-2: new full-speed USB device number 31 using ohci-pci
[ 90.040006] usb 7-2: device descriptor read/64, error -32
[ 90.284171] usb 7-2: device descriptor read/64, error -32
[ 90.524327] usb 7-2: new full-speed USB device number 32 using ohci-pci
[ 90.932598] usb 7-2: device not accepting address 32, error -32
[ 91.068653] usb 7-2: new full-speed USB device number 33 using ohci-pci
[ 91.476956] usb 7-2: device not accepting address 33, error -32
[ 91.476993] hub 7-0:1.0: unable to enumerate USB device on port 2
[ 91.689102] usb 7-1: new low-speed USB device number 34 using ohci-pci
[ 91.829193] usb 7-1: device descriptor read/64, error -32
[ 92.073353] usb 7-1: device descriptor read/64, error -32
[ 92.313515] usb 7-1: new low-speed USB device number 35 using ohci-pci
[ 92.453603] usb 7-1: device descriptor read/64, error -32
[ 92.697768] usb 7-1: device descriptor read/64, error -32
[ 92.937880] usb 7-1: new low-speed USB device number 36 using ohci-pci
[ 93.346193] usb 7-1: device not accepting address 36, error -32
[ 93.482285] usb 7-1: new low-speed USB device number 37 using ohci-pci
[ 93.890554] usb 7-1: device not accepting address 37, error -32
[ 93.890586] hub 7-0:1.0: unable to enumerate USB device on port 1
[ 94.026658] usb 7-2: new full-speed USB device number 38 using ohci-pci
[ 94.166741] usb 7-2: device descriptor read/64, error -32
[ 94.410901] usb 7-2: device descriptor read/64, error -32
[ 94.651065] usb 7-2: new full-speed USB device number 39 using ohci-pci
[ 94.791166] usb 7-2: device descriptor read/64, error -32
[ 95.035317] usb 7-2: device descriptor read/64, error -32
[ 95.275433] usb 7-2: new full-speed USB device number 40 using ohci-pci
[ 95.683746] usb 7-2: device not accepting address 40, error -32
[ 95.819837] usb 7-2: new full-speed USB device number 41 using ohci-pci
[ 96.228104] usb 7-2: device not accepting address 41, error -32
[ 96.228137] hub 7-0:1.0: unable to enumerate USB device on port 2
[ 97.228769] usb 7-1: new low-speed USB device number 42 using ohci-pci
[ 97.368863] usb 7-1: device descriptor read/64, error -32
[ 97.613022] usb 7-1: device descriptor read/64, error -32
[ 97.853185] usb 7-1: new low-speed USB device number 43 using ohci-pci
[ 97.993257] usb 7-1: device descriptor read/64, error -32
[ 98.237440] usb 7-1: device descriptor read/64, error -32
[ 98.477596] usb 7-1: new low-speed USB device number 44 using ohci-pci
[ 98.885866] usb 7-1: device not accepting address 44, error -32
[ 99.021939] usb 7-1: new low-speed USB device number 45 using ohci-pci
[ 99.430224] usb 7-1: device not accepting address 45, error -32
[ 99.430237] hub 7-0:1.0: unable to enumerate USB device on port 1
[ 99.670387] usb 8-1: new full-speed USB device number 2 using xhci_hcd
[ 99.725530] usb 8-1: New USB device found, idVendor=045e, idProduct=0724
[ 99.725534] usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 99.725536] usb 8-1: Product: SideWinder\xffffffe2\xffffff84\xffffffa2\xffffff84\xffffffa2 Mouse
[ 99.725537] usb 8-1: Manufacturer: Microsoft
[ 99.862481] usb 7-1: new low-speed USB device number 46 using ohci-pci
[ 100.002610] usb 7-1: device descriptor read/64, error -32
[ 100.246778] usb 7-1: device descriptor read/64, error -32
[ 100.486930] usb 7-1: new low-speed USB device number 47 using ohci-pci
[ 100.627023] usb 7-1: device descriptor read/64, error -32
[ 100.710960] hidraw: raw HID events driver (C) Jiri Kosina
[ 100.871183] usb 7-1: device descriptor read/64, error -32
[ 101.111339] usb 7-1: new low-speed USB device number 48 using ohci-pci
[ 101.122470] usbcore: registered new interface driver usbhid
[ 101.122472] usbhid: USB HID core driver
[ 101.479860] input: Microsoft SideWinder\xffffffe2\xffffff84\xffffffa2\xffffff84\xffffffa2 Mouse as /devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb8/8-1/8-1:1.0/input/input14
[ 101.479970] hid-generic 0003:045E:0724.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft SideWinder\xffffffe2\xffffff84\xffffffa2\xffffff84\xffffffa2 Mouse] on usb-0000:02:00.0-1/input0
[ 101.519608] usb 7-1: device not accepting address 48, error -32
[ 101.655704] usb 7-1: new low-speed USB device number 49 using ohci-pci
[ 102.063972] usb 7-1: device not accepting address 49, error -32
[ 102.064007] hub 7-0:1.0: unable to enumerate USB device on port 1
[ 102.276122] usb 7-1: new low-speed USB device number 50 using ohci-pci
[ 102.460240] usb 7-1: New USB device found, idVendor=06a3, idProduct=0728
[ 102.460244] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 102.460245] usb 7-1: Product: Saitek Cyborg Keyboard
[ 102.460247] usb 7-1: Manufacturer: Chicony
[ 102.472436] input: Chicony Saitek Cyborg Keyboard as /devices/pci0000:00/0000:00:16.0/usb7/7-1/7-1:1.0/input/input15
[ 102.472512] hid-generic 0003:06A3:0728.0002: input,hidraw1: USB HID v1.11 Keyboard [Chicony Saitek Cyborg Keyboard] on usb-0000:00:16.0-1/input0
[ 102.482325] input: Chicony Saitek Cyborg Keyboard as /devices/pci0000:00/0000:00:16.0/usb7/7-1/7-1:1.1/input/input16
[ 102.482463] hid-generic 0003:06A3:0728.0003: input,hiddev0,hidraw2: USB HID v1.11 Device [Chicony Saitek Cyborg Keyboard] on usb-0000:00:16.0-1/input1
[ 110.273412] usb 1-5: new high-speed USB device number 2 using ehci-pci
[ 110.793747] usb 1-5: device not accepting address 2, error -32
[ 110.905785] usb 1-5: new high-speed USB device number 3 using ehci-pci
[ 111.017914] usb 1-5: device descriptor read/64, error -32
[ 111.642309] usb 1-5: device not accepting address 3, error -32
[ 111.754389] usb 1-5: new high-speed USB device number 4 using ehci-pci
[ 111.979632] usb 1-5: unable to get BOS descriptor
[ 111.980758] usb 1-5: unable to read config index 0 descriptor/start: -32
[ 111.980760] usb 1-5: chopping to 0 config(s)
[ 111.983883] usb 1-5: string descriptor 0 read error: -32
[ 111.983886] usb 1-5: New USB device found, idVendor=1b1c, idProduct=1a06
[ 111.983888] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 111.983975] usb 1-5: no configuration chosen from 0 choices
[ 117.189210] usb 1-5: USB disconnect, device number 4
lspci
- Κώδικας: Επιλογή όλων
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (external gfx0 port B) (rev 02)
00:02.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (PCI express gpp port B)
00:04.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (PCI express gpp port D)
00:09.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (PCI express gpp port H)
00:0a.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (external gfx1 port A)
00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] (rev 40)
00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller (rev 42)
00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA) (rev 40)
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller (rev 40)
00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge (rev 40)
00:14.5 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
00:16.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:16.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor HyperTransport Configuration
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Address Map
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Link Control
01:00.0 VGA compatible controller: NVIDIA Corporation GK106 [GeForce GTX 650 Ti Boost] (rev a1)
01:00.1 Audio device: NVIDIA Corporation GK106 HDMI Audio Controller (rev a1)
02:00.0 USB controller: Etron Technology, Inc. EJ168 USB 3.0 Host Controller (rev 01)
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06)
04:00.0 USB controller: Etron Technology, Inc. EJ168 USB 3.0 Host Controller (rev 01)
05:0e.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller (rev c0)
ΥΓ: παρατήρησα πως η εντολή dmesg κάθε φορά έδινε διαφορετικά αποτελέσματα γι αυτο έκανα επανεκκίνηση και εκτέλεσα εκ νέου την εντολή
